Forces and motion: A simple introduction (2024)

  • Home
  • A-Z index
  • Random article
  • Timeline
  • Teaching guide
  • About us

You are here:Home page >Science >Forces and motion

Forces and motion: A simple introduction (2)

by Chris Woodford. Last updated: October 22, 2022.

It's hard to believe, but everything in the world is in motion, all the time. Even things that look perfectly still are packed with atoms that arevibrating with energy. Understanding how motion works was one of thegreat milestones of science and it's credited to the brilliant English physicist Sir Isaac Newton. His laws of motion,written over 300 years ago, were so well stated that scientists still use them in most situations today. The basic idea Newton taught us is thatmotion is caused by forces—which is easy enough to understand: kick a ball (the force)and it flies into the air (the motion). But forces don't always make things move: a bridge has lots of forces acting on it, but it doesn'tgo anywhere. Also, the "motion" forces produce is sometimes a shift in the direction in which something is moving or a change in its shape.So what exactly are forces and how they do they produce these different kinds of motion?It's time to take a closer look at the science of moving things!

Photo: A space rocket is an impressive demonstration of Newton's laws of motion. The force of the hot exhaust gas shooting backward propels the rocket forward. The rocket isn't moving by pushing against the ground; it can move forward like this even in "empty space," confirming the essential truth of Newton's laws. Photo, of a proton booster rocket blasting off with a component of the International Space Station, courtesy of NASA on the Commons.

Sponsored links

Contents

  1. Forces
    • What are forces?
    • How many forces?
    • Forces and movement
    • Turning forces
    • Sticking forces
    • Forces that change shape
    • Making forces bigger
    • Mastering forces
  2. Motion
  • Newton's three laws of motion
  • Newton's laws in practice
  • Measuring motion
  • What is an impulse?
  • Find out more
  • Forces

    "May the force be with you" is a strange thingto say to someone, because there's a never a moment whenforces aren't. Forces are the hidden power behindeverything that happens in our world—and beyond. Forces makeyour heart race and your lungs pump; they swing theplanets round the Sun and bind atoms tight. Think of anything,absolutely anything, that's going on in the universe right now, andyou can guarantee that somewhere, somehow forces are responsible.

    Forces and motion: A simple introduction (3)

    Photo: Forces are the power behind our world. Thump an objectwith a big enough force and it will accelerate to a very high speed. That's thebasic idea behind bullets and missiles like theone blasting from this replica of an 1855 cannon.Photo by Mollie Miller published undera Creative Commons Licencecourtesy of US Army/Flickr.

    What are forces?

    Kick a ball and it'll fly up into the air beforefalling back down to the ground. That's an example of everydayforces. What exactly is a force?

    A force is a pushing or pulling action that can make things move, change direction, or change shape.

    Kicking a ball involves you applying a force (a push with your foot)that makes it fly upward. But once it's shooting through the air, theinvisible force of gravity pulls it back down to Earth—and that's adifferent force taking over.

    Forces and motion: A simple introduction (4)

    Photo: In soccer, several different forces power the ball from your foot to the goal.Photo by Justin M. Boling courtesy of US Marine Corps.

    Look a bit more closely and you'll see some otherforces working on the ball too. When your foot meets the blown-upball, the ball squashes inward a little bit because it's made ofplastic or leather. So there's a force there too, causingthe ball to change shape. Because the ball is stretchy (elastic), it rapidlyexpands again, returning to its original shape—and it flies intothe air by pushing out against your foot. That's also a force. Whenthe ball finally hits the ground, it squashes in again before flexingback out, and that makes it bounce into the air, maybe severaltimes. More forces! As the ball rolls across the ground, it scrapesagainst the grass or concrete and gradually comes to a halt. Anotherforce is at work there—the force of friction—stealing the ball'senergy and bringing it to rest. So everything that happens to theball, in its entire journey from your foot to the ground, involves aseries of forces pushing it, pulling it, stretching it, or draggingon it.

    Sponsored links

    How many forces?

    When we're looking at how things work or move, wetry to identify the force that's responsible. So when a flying ballzooms to the ground, we say "Aha! That's the force of gravity."But it's very rare to find only one force acting on something. Mostof the time, there are several different forces working at once, allpulling or pushing with different strength, often in completely different directions.The effects of all these forces add together or subtract from oneanother to produce an overall force (or perhaps no force at all).

    Sometimes all the forces are exactly in balance—their effects cancel one another out. If you look at agiant suspension bridge, it's not going anywhere or changing itsshape, so you might think there are no forces acting on it. Wrong!There's the weight of all the cars driving across it pullingdownward, plus its own weight. So why doesn't the bridge tumble intothe river? The force of gravity pulling down on the bridge is exactlybalanced by tension (pulling forces) in the suspension cablestugging it back up again. Because all the forces on a bridge areequal, the bridge itself goes nowhere—so it's safe for the cars todrive across.

    Forces and motion: A simple introduction (5)

    Artwork: Bridges are giant static structures, but that doesn't mean they're force free. Bridges carry loads by balancing them with stretching forces (tension, shown in blue),squashing forces (compression, shown in red), or both. Different types of bridges do this in different ways. In a suspension bridge, the towers are in compression (squashed down) while the huge cables that support them are in tension (pulling tight).

    But there are also times when different forces acton something without canceling out. Suppose you're in a sailboat,making very little progress in a strong wind, so you decide to useyour outboard motor. Waves might be pushing your boat in onedirection (that's one force), the wind could be pushing a differentway (another force), and, depending on how you steer, your enginewill be pushing another way (a third force). There's also a forcebetween the bottom of the boat (the keel) and the water. All theseforces act in different directions, a bit like a multi-directionaltug-of-war. If your boat moves in a certain direction, one of theforces must be winning. We call that the resultant force—becauseit's the overall force that results when several forces act onone object at the same time. It's just as though the resultant forceis the only force that's acting on the object and all the otherforces have disappeared.

    Forces and motion: A simple introduction (6)

    Photo: Resultant force: In this tug-of-war, if the red team pulls left with a strong force and the orange team pulls right with a weaker force, there is an overall force to the left (white). This is called the resultant force and it's equal to the red force minus the orange force.Photo by Grace Riegel courtesy of DVIDS.

    Forces and movement

    When a force acts on an object, it often makes itmove faster or in a different direction. Once something is moving,you don't need a force to keep it moving: it will carry on moving allby itself unless another force stops it. When a rocket blasts intospace, you need a force to make it lift off to begin with and toovercome the force of Earth's gravity. But once the rocket is inspace, it will carry on moving all by itself until and unless anotherforce stops it.

    Any time you want to make something speed up(accelerate) or slow down (decelerate), you need to use a force. Infact, you always need to use a force if you want to alter howsomething is moving. English scientist Isaac Newton was the firstperson to figure out properly how forces change the way things move.He worked out three simple principles, called Newton's laws,that explain how this happens. We'll come onto all that in a moment.

    Turning forces

    It takes a force to make something move in adifferent way, and that includes changing the direction in whichsomething is moving even if its speed stays the same. If you want tomake something go round in a circle, you have to apply a force tomake it turn and keep on applying that force to keep it turning. Thatmakes sense: something moving in a circle is constantly changingdirection, so you have to apply a force all the time. In the sportcalled throwing the hammer, an athlete swings a heavy weight aroundtheir head using a long steel wire. As long as they keep pulling thewire, they're applying a force, which is called centripetal force,and this force keeps tugging the weight round and round in a circle.As soon as the athlete lets go of the hammer, there's nothing toprovide the centripetal force anymore, so there's nothing to keep thehammer turning in a circle. At that point, it flies off in a straightline before curving through the air as gravity brings it back down tothe ground.

    Forces and motion: A simple introduction (7)

    Photo: Hurricanes are powered by force. The air pressure is higher at the edge than in the middle, creating a force toward the center—centripetal force—that makes the air rotate at high speed. This photo shows Hurricane Fran heading for North Carolina and Virginia in August 1989; it went on to cause about $5 billion worth of damage. Photo courtesy of NASA on the Commons.

    Look carefully at things whirling in circles andyou'll always find a centripetal force, somewhere, that's doing theturning. As your laundry tumbles round in a clothes washer, it'llcollect a huge amount of water, which has to be removed during the finalspin. The washer drum whirls at high speed, constantly pushing theclothes round in a circle and providing centripetal force to keepthem turning. The water inside the clothes pushes through theirfibers. There's nothing to hold it in place—no centripetal force—soit flies out through holes in the outside of the spinning drum,helping to dry your clothes. Hurricanes are another example of howforces make things turn in a circle. There's very low pressure at thecenter of a hurricane and higher pressure toward the edge. That meansthere's an overall pressure pushing toward the center and thisprovides the centripetal force that makes the air spin around, givingthe powerful whirling motion that makes hurricanes so verydestructive.

    Forces and motion: A simple introduction (8)

    Artwork: Spin-drying laundry uses the power of centripetal force. 1) A clothes washing machine has a rotating drum (white) with holes in it mounted inside a static drum (red) that's completely sealed. 2) As the inner drum spins, it pushes your clothes round in a circle, supplying the centripetal force that makes them turn. 3) The water inside the clothes can move freely and there's no centripetal force to make it move in a circle, so it flies off in straight lines through holes in the drum. 4) The water collects in the outer drum. 5) At the end of the spin cycle, the water pumps out through a drain pipe.

    Sticking forces

    Forces make things move—but they also bringmoving things to a halt. Roll a toy car over a rug and it'll quicklycome to a standstill. The force of friction steals the car'senergy and slows it down. Friction is the force between two differentobjects that are in contact, either when they're locked together andtouching or when one of them slides past the other.

    Perhaps surprisingly, friction can help things tomove and stop them from moving at exactly the same time. Take awheel, for example. When a car goes round a corner, friction holdsits tires in place, giving powerful grip that locks the car to theroad and stops it skidding outward. As the tires grip the road, thewheels push forward, moving the car along. At exactly the same time,however, friction between the wheels and the axles that hold themsteals some of their energy, slowing them down. So friction can beboth a good thing and a bad thing. When you park on a hill, frictionis the reason your car is still there when you get back next day. Butit's also one of the reasons you have to put so much gasoline in yourtank: friction between your car and the air you drive through stealsquite a lot of the energy that would otherwise be speeding you downthe road.

    Forces and motion: A simple introduction (9)

    Photo: The soles of your shoes are designed to maximize friction—or you'd fall over every time you took a step forward.

    In machines and engines, friction is usually quiteunhelpful. The constant rubbing of one part against another wears outeven very hard and durable metals like stainless steel. That's whyengineers use lubrication: by squirting liquids and gelsbetween moving parts, we can help them slide past one another withless friction, reducing wear-and-tear, cutting maintenance costs, andreducing energy losses.

    Forces that change shape

    Have you ever tried tugging the aluminum ring-pull of adrinks can and found it suddenly snaps off in your hand? What you'retrying to do is use a force to make the ring-pull move and changedirection at the same time. But instead of doing what you expect, onepart of the ring-pull snaps away from the other. This is an exampleof how forces can change an object's shape, instead of making it moveor change direction. Every time you change something's shape (andthat includes breaking or snapping it), you're putting forces towork. Whether you're crushing a can for recycling, tearing a piece ofpaper to shreds, or stretching the elastic on a catapult, you'remaking something into a new shape. That involves rearranging theatoms inside it, and, because atoms are generally locked tight insolids, it takes force.

    Exactly what effect a force has depends on thematerials involved. Soft materials, such as rubber, bend and flexvery easily and spring back to their original shape when you take theforce away again. Materials like this are called elastic. A lot ofmaterials change shape easily but don't spring back the way theywere; these are called plastic (though they're not always made ofplastics—even soft metals, like gold, can be plastic if theyreadily change their shape).

    Some materials don't seem to change shape when youapply forces, though they do change very gradually over a period oftime. If you straighten a paperclip, you're using a force to make itplastic—to cause what's called a plastic deformation (a change ofshape that isn't reversible). If you do this several times, thepaperclip will snap in half—a different kind of reversible change.That's an example of what's called metal fatigue, which is whererepeated forces cause a material to break completely. It's one of thereasons that parts fail in machines like aircraft and automobilesafter flexing back and forth hundreds, thousands, or sometimes evenmillions of times.

    Sponsored links

    Changing materials

    Forces and motion: A simple introduction (10)

    Forces change different materials in different ways.Elastic materials change shape when you apply a force but go back to their original shape when you take the force away. Plastic materials also change shape, but stay in their new shape when you remove the force. Everyday objects use elasticity and plasticity in many different ways:

    1. Elastic: This large paper clip uses the elasticity of metal to spring back to shape.
    2. Plastic: putty takes whatever shape you push it into.
    3. Elastic and plastic: The ring-pull in this can is a little bit elastic, but if you push it too far, it cuts into the can beneath causing a permanent, plastic change of shape (the can rips open).
    4. Plastic and plastic: Toothpaste moves wherever you push it, so it's plastic like the tube that contains it.
    5. Elastic and plastic: The elastic waistband of your clothes keeps them in body-hugging shape, but it will eventually sag through slow, plastic change.
    6. Elastic and plastic: The uppers (top parts) and soles of sneakers are elastic so they spring back to shape, but they also permanently change shape as you wear them, molding to the shape of your feet so they fit you more comfortably.

    Making forces bigger

    You can make quite a lot of force with your body.Weightlifters can raise huge lumps of metal above their heads, whilesome professional strongmen can pull trucks, trains, and planes evenwith their teeth. But there's a limit to what even the toughestathlete can do. Thanks to human ingenuity, that's not the end of thestory. With clever things called simple machines, we can makeour arms and legs move much bigger and heavier weights. Simplemachines include levers (such as wrenches), pulleys, ramps, wheels,and gears. All of them work by allowing your body to produce moreforce than it can make alone. So if you use a wrench to turn a rustynut, you're using the power of a lever to magnify a force: the longerthe lever, the more the force at the center is magnified. You applyless force at the edge (so it feels easier), but the wrench magnifiesthe effort you apply, converting it into more force at the center(so the nut turns more easily). The catch is that you have to turn your end of the wrench a bigger distance to make the tough rusty nut budge.

    Giant everyday machines like cranes, diggers,bulldozers, and combine harvesters use a whole series of simple machines to carry out complex jobs. Most of them havehydraulic rams, which are liquid-filled cylinders a bit like water pistols,that are thicker at one end than the other. As the liquid moves froma smaller volume to a bigger one (from the thin end to the thickone), it slows down but gains force. And that's how a hydraulic ram,operated by a person's arm, can do something like lifting a truckclear of the ground.

    Forces and motion: A simple introduction (11)

    Photo: A digger like this magnifies forces using hydraulics: it squirts a liquid through hydraulic cables and pipes (blue) to operate the hydraulic rams (red) that push and pull the arm and bucket.

    Mastering forces

    Forces keep us firmly in our place. You're sittingstill reading this right now because atoms in your chair,electrically repelling atoms in your body, are creating an upward,pushing force that exactly balances the force of gravity, pullingdown. Gravity is the biggest, boldest force most of us ever encounterand it stretches all the way from Earth's fiery center to the otherside of the universe.

    Great human achievements have often meantmastering—and overcoming—forces like gravity.When the Wright brothers made the first powered flight in 1903, they used wings and an engine to generate an upwardforce called lift that was strong enough to overcome gravity.Astronauts blasted up into space after pioneers like Robert HutchingsGoddard figured out how to use space rockets to make enough force to"escape," temporarily, from the pull of Earth's gravity.When Jacques Piccard and Don Welch dived almost 11km (6.7 miles) to the bottom of the deepestocean in 1960, they did it in a super-reinforced diving bell (a bathyscaphe named Trieste).It had walls 12.7cm (5.0in) thick to resist the enormous, crushing force of waterpressure at that depth—something else caused by Earth's gravity.

    Anyone who tries to go further or fasterfor longer has to master forces of one kind or another.Engineers who've developed cars that can beat speed records have learned to battle forces like friction and drag (air resistance). Stars oftrack and field who run further or jump higher have trained theirbodies to produce more force for longer so they can conquer theiropponents. Armies with faster planes, tougher tanks, or guns thatfire bullets further are all using forces to their advantage.

    Some of us use our brains to think smarter. Othersthink more creatively and do surprising and original things. Butevery physical achievement ultimately boils down to using science toovercome forces like gravity and friction, so we can do "impossible"things no-one has ever done before. Understand the science behind thescenes and the force will always be with you!

    Sponsored links

    Motion

    We've already seen that forces can make things move, but how exactly are forces and motionlinked together? How can we measure different amounts of motion or figure out where aflying bullet or a soaring space rocket is going to end up? Isaac Newton's work helpsus tie forces and motion together in an easy-to-understand way. It also lets us calculatehow things will move when we apply forces to them.

    Newton's three laws of motion

    Forces and motion: A simple introduction (12)

    Photo: Isaac Newton—the man who put science in motion. Picture from an 18th-century engraving by William Thomas Fry courtesy of US Library of Congress.

    Sir Isaac Newton (1642–1727) summarized how things move with three simple laws. They're oftensimply called Newton's laws and they apply to pretty mucheverything (except very tiny subatomic things in the quantum world and objects moving close to the speed of light):

    1. Things that are still stay still and things that are moving keep moving with asteady speed unless a force of some kind pushes or pulls on them.
    2. When a force acts (pushes or pulls) on an object, it changes the object's speed or direction (in other words, makes it accelerate). Thebigger the force, the more the object accelerates.
    3. When a force acts on an object, there's an equal force (called areaction) acting in the opposite direction. This law is sometimeswritten "action and reaction are equal and opposite."

    Newton's laws in practice

    How do those laws run in practice? Suppose you're standing on a skateboard. Unless youkick against something, you'll stand on it forever going nowhere.That's Newton's first law in action. Now if you kick against thesidewalk, you start moving: your speed increases, and the harder you kick the faster you accelerate.There's an example of Newton's second law. And what about the thirdlaw? Kick back against the pavement and the pavement pushes youwith an equal and opposite reaction force that propels you forward.

    Forces and motion: A simple introduction (13)

    Photo: Another example of Newton's laws: 1) The tractor stays still unless a force acts on it. 2) When this boy (and his friends, who are out of shot to the left) supply a force by pulling on the rope, the tractor accelerates toward them. 3) When the boys pull on the rope, the tractor pulls back: that's what keeps the rope taut. Does that seem confusing? Think of it this way. Before the boy's friends arrive, he pulls by himself on the rope and can't move the tractor. The boy pulls the rope to the left, the tractor pulls it to the right, the two forces balance, and the tractor goes nowhere.

    Only motion

    One important thing to remember about the laws of motion is that they apply only to things that are moving—things in motion! So, for example, if you stare down atyour feet and wonder why you're standing firmly on the ground without sinking in, the explanationhas nothing to do with Newton's third law of motion (action and reaction). You're standing stillbecause repulsive, electrostatic forces between atoms in your shoes and atoms in the ground(pushing upward) exactly counterbalance the force of gravity (pulling down). Thereis no motion, so Newton's second and third laws don't apply. The first lawdoes apply: your body is still because there is no overall force acting on it.If the ground suddenly collapsed, the upward force would no longer be enough to balance your weight.There would be a net downward force, making you accelerate into the ground.

    Measuring motion

    How fast is that plane? Will my car get there faster than yours? Which of us will use the most gas on the drive home? How can you fire a rocket up from Earth and have it land precisely on the Moon? If you want to answer questions like this, you need to be able to measure motion. We have four main ways of doing that, using speed and velocity, acceleration, momentum, and kinetic energy.

    Speed

    A sports car can go 50 times faster than you can walk and 8 times faster than you canrun. That's because its engine turns gasoline into power much morequickly than your body can burn food to pump your muscles. The faster a car burns gas, the quicker it can go—the morespeed it has.

    In science, we define speed as the distance something goes in a second. You can figure out a car's average speed by dividing how far it goes by how long it takes to get there. If a car is going at 100km/h (60mph), it can travel 100km (60 miles) in an hour.

    This is the formula for speed:

    Speed = d/t

    Here, d is distance and t is time.

    You can see from this that a car is a kind of time machine: you can use its speed to get somewhere more quickly. If yougo twice as fast, you can arrive in half the time. The faster you go,the sooner you get there, and the more time you save. Of course, youcan never actually arrive before you leave—that would be taking thescience a bit far!

    Velocity

    Forces and motion: A simple introduction (14)

    Photo: These two gray cars have exactly the same speed but completely different velocity, because they're traveling in opposite directions.

    Velocity is not just another word for speed: it means your speed in a certaindirection. When a Formula-1 car races round a tight bend, itsspeed stays the same, but its velocity is always changing becauseit's turning and changing direction the whole time.

    Suppose you drove from the North Pole to the South Pole in a straight line at 100km/h(60mph) and then drove back again at the same speed. Your average speed would be100km/h (60mph), but your average velocity would be zero. That'sbecause your velocity from South to North would be exactly oppositethe velocity from North to South and the two would cancel out.

    This is the formula for velocity:

    Velocity = d/t

    Here again, d is distance and t is time. You'll notice this formula is the same as the formula for speed. But remember when you have to state which direction the velocity is heading in too.

    Acceleration

    If you're a driver, acceleration means putting your foot down to go faster. But ifyou're a scientist, acceleration also means stamping on the brakes.That's because acceleration means any change in yourvelocity. Speeding up is an acceleration, but so is slowing down—it's just a negative acceleration. And because your velocity is yourspeed in a certain direction, you accelerate every time you go rounda corner, whether you change speed or not.

    Forces and motion: A simple introduction (15)

    Photo: This red car is going round a curve at constant speed, but its velocity is changing all thetime because its direction is changing. That means it's accelerating as well, even though its speed stays exactly the same!

    A car is a heavy lump of metal and it takes a lot of force to get it moving, speed it up, slowit down, or turn it round. The heavier something is, the more forceit takes to accelerate. That's why trucks take longer to acceleratethan cars, even though they have much bigger engines.

    People compare cars by seeing how many seconds they take to accelerate from 0-100 km/h(0-60 mph). If a car can go from 0-100 km/h in 5 seconds, it changesits velocity by 100km/h in 5 seconds, so its acceleration is 20 km/hper second. That's the same as changing your speed by 5.5meters/second every second. Scientists write that 5.5 m/s/s or 5.5m/s2 (and say it out loud as "five point five meters per second squared").

    This is the formula for acceleration:

    a = v/t

    Here, v is velocity and t is time.

    Momentum

    Forces and motion: A simple introduction (16)

    Photo: If a truck has several times the mass of a car,but moves at the same speed, it has several times more momentum. The silver truck (top right) has twice the mass of the car and twice the momentum,while the blue truck (bottom right) has fivetimes the mass of the car and five times the momentum.If each vehicle were to crash into a brick wall and stop in exactly the same time, it would exert a force proportional to its momentum. So the blue truck would exert five times as much force as the car.

    An object's momentum is a measure of how much it wants to keep moving—and how long it can exert a force for when it stops. You can figure out something's momentum by multiplying its mass by its velocity:

    momentum = mv

    Here, m is mass and v is velocity.

    If two things crash together, their total momentum is the same before andafter the collision. This is a basic law of physics called the conservation ofmomentum. If a car crashes into a wall, bits of the wall startmoving—so they gain the momentum the car loses and that's what slowsit down.

    Kinetic energy

    It takes energy to make something move, and the faster it goes the more energy it needs.In other words, energy feeds speed. The energy something has whenit's moving is called kinetic energy. You can figure out acar's kinetic energy from this formula:

    kinetic energy = ½mv2

    Here, m is the car's mass and v is its velocity. If you double the weightof a car (by adding a caravan on the back), you need to use twice asmuch energy to go at the same speed. If you want to double yourspeed, you'll need four times as much energy, because energy isrelated to the square of your speed.

    What is an impulse?

    Isaac Newton's second law tells us that force causes acceleration, and we can write that law as an equation:

    F = m a

    So the more force you supply, the more acceleration you get. But the same equation tells us that a = F / m, sothe more massive an object, the less it will be accelerated by a force of the same size. If you weigh twiceas much as a friend and I give you both the same push, your friend will accelerate twice as quickly.

    Now we also know from up above that a = v / t, so we can rewrite Newton's second law like this:

    F = m v / t

    In other words, we can define force as the rate of change of momentum: themore quickly something's momentum changes, the more force is acting on it.

    Rearranging the equation one more time, we get:

    F t = m v

    The change in momentum is equal to the force acting on something multiplied by the time for which it acts,and it's called an impulse. The impulse is simply F × t.

    The sporting impulse

    Impulses are a really important concept in sport—for two reasons. Suppose you want to kick a soccer ball a long way, or hit a tennis ball really hard at your opponent. You'll need to give it lots of momentum (or energy, if you prefer) and to do that, you'll need to apply your boot(or tennis racket) to the ball for as long as possible—with what's called a follow-through. Makingt (the time for which the force is acting) as long as possible produces a bigger change of momentum.If you think about it, t is the only thing you can really change if you're a world-class athlete: the ballhas a constant mass (m) and you can only supply so much force (F), so the only way to maximize momentum (m v)is to maximize the time (t) for which you apply your force.

    Forces and motion: A simple introduction (17)

    Photo: Think sport? Think impulse! If you want to hit a ball as far as possible, you need to apply a force with your muscles for as long as possible: you can't change the mass (m) of the ball, but you can maximizethe time (t) during which the bat touches the ball as well as the force (F) to give the ball as big a velocity (v = F t / m) as possible. Photo by Shannon McMillan courtesy of US Marine Corps.

    There's another good reason why sports people try to increase the time for which they apply a force with their muscles.Suppose you're catching a fast-moving baseball or cricket ball. It's fairly heavy and hurtling toward you at high speed, soit has quite a lot of momentum. If you bring the ball to a halt slowly, by pulling your hands and arms into your body, you increasethe time (t), so the force your hands and arm feel (m v / t) is smaller and the ball hurts you less. Try to catch a ballwithout moving your hands or arms and you're making t very small, which means m v / t is bigger and the ball will hurt you more. The same is also true of hitting a ball with a baseball bat or a tennis racket, throwing a javelin, or applying a force with your muscles in any other way. Generally, all sports people try to apply forces with their muscles for as long as possible to reduce the impact on their body and the risk of injury.

    Sponsored links

    Don't want to read our articles? Try listening instead

    If you'd rather listen to our articles than read them, please subscribe to our new podcaston Apple Podcasts, Spotify, Audible, Amazon, Podchaser,or your favorite podcast app, or listen below:

    Find out more

    On this website

    • Brakes: How do you get rid of motion when you don't want it?
    • Bullets: How can we use the laws of motion to understand how bullets fly?
    • The law of conservation of energy: Why can we create or destroy energy?
    • Energy: What is energy anyway?
    • Gears: Why can you make a machine go faster or increase the force it produces, but not both at the same time?
    • Science: A full list of all our science articles.
    • Science of sport: How the laws of motion can help us understand sports like tennis, baseball, running, and swimming.

    Books

    For younger readers

    These are particularly suitable for ages 9–12:

    • A Crash Course in Forces and Motion by Emily Sohn. Capstone, 2019. The graphic-novel style of this 32-page introduction should appeal to reluctant readers and children who prefer comics to books. Described as suitable for ages 8–14.
    • Can you Feel the Force? by Richard Hammond. New York/London: Dorling Kindersley, 2007/2015. A good, slightly irreverent introduction to basic physics, including Newton's laws. Ages 8–10.
    • Thud! Wile E. Coyote Experiments with Forces and Motion by Mark Weakland. Capstone, 2014. Another simplified, visual introduction that will appeal to young, reluctant readers; 32 pages for ages 8–14.
    • Forces and Motion: Investigating a Car Crash by Ian Graham. Raintree, 2014. A great example of how Newton's laws are used in the real world. With an engaging graphic novel format, this is another good choice for reluctant readers and children who struggle to find science relevant.
    • Fatal Forces by Nick Arnold. Scholastic, 2014. A funny, cheeky guide to forces from the popular Horrible Science series. For ages 10–12, 128 pages.
    • Science Investigations: Forces and Motion by Chris Oxlade. Wayland/Rosen, 2008. An alternative look at basic mechanics. Ages 8–10.

    For older readers

    • Newtonian Mechanics by A.P. French. W. W. Norton, 1971. Excellent, classic introduction for undergraduates, but not overly difficult for high-school readers. Don't worry that it's an old book; it's still in print and easy to obtain—and Newton's laws haven't dated in 300 years! This is the book I learned from as a physics student.
    • Physics: Algebra/Trig by Eugene Hecht. Thomson-Brooks/Cole, 2003. I came across the first edition of this book by accident when I was writing some physics articles in the 1990s and really admired the clarity of the text and illustrations and the comprehensive coverage (you'll find virtually every aspect of physics in here somewhere). Eugene Hecht does a very good job of conveying concepts clearly and briefly, with easy-to-understand math, and plenty of real-world examples. Ideally suited to high-school students (ages 16–18), though also good for older readers and brighter youngsters. It's relatively easy to find cheap secondhand early editions of this book if you can't afford the latest version.

    On other sites

    Please do NOT copy our articles onto blogs and other websites

    Articles from this website are registered at the US Copyright Office. Copying or otherwise using registered works without permission, removing this or other copyright notices, and/or infringing related rights could make you liable to severe civil or criminal penalties.

    Text copyright © Chris Woodford 2009, 2022. All rights reserved. Full copyright notice and terms of use.

    Can't find what you want? Search our site below

    Forces and motion: A simple introduction (18)

    More to explore on our website...

    • Communications
    • Computers
    • Energy
    • Engineering
    • Environment

    • Gadgets
    • Home life
    • Materials
    • Science
    • Transportation
    • Home
    • A-Z index
    • Send feedback
    • Random article
    • Timeline
    • Teaching guide
    • About us

    Back to top

    Forces and motion: A simple introduction (2024)

    References

    Top Articles
    Latest Posts
    Recommended Articles
    Article information

    Author: Francesca Jacobs Ret

    Last Updated:

    Views: 5695

    Rating: 4.8 / 5 (68 voted)

    Reviews: 91% of readers found this page helpful

    Author information

    Name: Francesca Jacobs Ret

    Birthday: 1996-12-09

    Address: Apt. 141 1406 Mitch Summit, New Teganshire, UT 82655-0699

    Phone: +2296092334654

    Job: Technology Architect

    Hobby: Snowboarding, Scouting, Foreign language learning, Dowsing, Baton twirling, Sculpting, Cabaret

    Introduction: My name is Francesca Jacobs Ret, I am a innocent, super, beautiful, charming, lucky, gentle, clever person who loves writing and wants to share my knowledge and understanding with you.